USR-WIFI232-610-V2 is a wireless serial WIFI converter, which is used for the project of RS232/RS485 serial equipment to WIFI or Ethernet networking. It can be controlled by mobile phone or laptops, also can be connected to the remote server.
Features of Serial WIFI Converter
Hardware flow control (RTS/CTS) RS232 interface, male mouth(needle) consistent with computer pin definition
DC5~18V wide voltage input, can provide 2A current MP1482DS DCDC power supply chip, keep system reliability.
RS232 RS485 automatic switching
RJ45 network connection, support wired Ethernet transmission
Reload button, do not worry incorrect settings (in working status, press the button 3-5s then it load to default settings and automatic restart)
Rich status indicator light: Power Ready Link RXD TXD
Modern agriculture, military field and other wireless related secondary development applications
Application of Serial WIFI converter
1.Application of AP
2.Application of STA
3.Application of AP+STA
4.Wired and Wireless Application
5.Application of one AP and one STA
Simple Transparent transmission
Transparent transmission means that whatever is transferred, our device plays the role of a channel and sends data to the target without modification. On-site monitoring equipment sends data to Wireless Device Servers transparent data transmission terminal by itself port, the terminal CUP receives data by serial port and package data.
Various parameter setting method
Download settings software, search Wireless Device Servers in the LAN through the serial port server IP, name, MAC address, or the version number. Then set the parameters you need, otherwise keep the default.
1.Open your browser and inter the default IP address of the Wireless Device Servers.
2.Open the login page of Serial Server, Enter the user name and password (default admin).
3.After setting parameter, Click â€œSaveâ€œ and â€œRestartâ€œ, then setting will take effect.
Serial AT commands Settings
User can set parameter by module itself without going through another computer to configure. This setting method is used in the following situation: user have to configure IP address and destination IP address on site. AT command can meet the demand. After MCU connects serial server module by TTL (UART), MCU can configure setting by AT command.
MIPS solution (32bit 360MHz)
RAM / Flash
8M / 1M
8 pin RJ45
10/100 Mbps, MDI/MDIX, auto switch between cross and direct connection