Overview
This manual introduces the G806(Industrial 4G Router) OPENVPN Client function.
1. Introduction
OPENVPN is application layer VPN which bases on Openssl library. It supports bidirectional authentication which bases on certificate, that’s to say client needs to authenticate server and server also needs to authenticate client.
2. Configuration
2.1. Enter G806(Industrial 4G Router) Web Server
Connect PC to G806(Industrial 4G Router) LAN interface or WLAN interface and configure PC into DHCP mode as follow:
Then enter G806(Industrial 4G Router) Web Server by entering G806(Industrial 4G Router) LAN interface IP address (Default is 192.168.1.1) and login with username and password(Default both are root). User can switch between English/Chinese from top right corner.
2.2. Add OPENVPN Interface
After entering Web Server, add OPENVPN interface as follow:
Protocol can be TUN(Route mode) or TAP(Bridge mode). After typing in interface name and choosing protocol, please click ‘Submit’ to add OPENVPN interface.
2.3. Configure OPENVPN Interface
After adding OPENVPN interface, it will be OPENVPN interface configuration web page.
Configure ‘General Setup’:
After configuring ‘General Setup’ and clicking ‘Save&Apply’, please configure ‘Advanced Settings’: