Network expert of industrial IoT
sales@usriot.com
USR Cloud Official Website
USR Cloud Official Website
Leave Message

*

*

*

*

*

*

*

Support Center

USR IOT SERVICE AND SUPPORT

Bluetooth Modules
Home-FAQ-Bluetooth Modules
Home/FAQ/Bluetooth Modules

Upgrading bluetooth modules-USR-BLE100/101 firmware manual

Upgrading bluetooth modules-USR-BLE100/101 firmware manual

2020-05-19

2020-05-19
Share TO:

 Overview

This manual introduces the method to upgrade bluetooth modules-USR-BLE100/101 firmware by serial port.

 

 

1.Hardware connection

If USR-BLE100/BLE has TTL transfer to RS232 peripheral circuit and RS232 interface, user can connect BLE100/101 to PC by RS232 transfer to USB cable. And if USR-BLE100/BLE doesn’t have TTL transfer to RS232 peripheral circuit, user needs to connect BLE100/101 to PC by TTL transfer to USB cable. After connecting module to PC successfully, user can power the module and start to upgrade firmware.

 

2.Upgrading firmware

Step 1: Run upgrading software bootloader_host.exe for BLE100/101.

1.1.jpg

1.2.jpg

Step 2: Select firmware file(Expanded name of firmware file is cyacd).

2.jpg

Step3: Select correct COM port and configure baud rate to 115200.(No matter what is the actual baud rate, please configure 115200 as baud rate in software)

3.jpg

Note: If this COM port is occupied by other software or application, the software will display as follow:

3.1.jpg

Step 4: Power-up module again or press restart button of BLE device, then press ‘download’ within one second after BLE device restarting.

4.jpg

Step 5: If green line on bottom of software start moving forward, it means upgrading process starts successfully. If not, repeat Step 4.

5.jpg

Step 6: After upgrading firmware successfully as follow, please restore module to default settings and restart , then module will work with new firmware.

6.jpg