【What is the product model?】: Modbus RTU to WiFi Converter USR-WIFI232-630
【How do you connect and configure the USR device?】: Unit is connected to modbus meter via twin core shielded cable. raspberry pi is connected via wifi to USR device
【What's your application? What do you want to realize?】: Polling eastron SDM630 power meters for data via modbus. I would like to know what the settings should be to get the RPi to connect to the wifi and to get it to poll the modbus meters.
Please set 630 parameters on the webpage.Set 630 mode to select Modbus TCP<=>Modbus RTU.
Turn on MODBUS polling time.
I have connected the USR device to a router now via cable (to ensure it wasnt a wifi problem).
It is now part of the local network 10.1.1.99 port 8899 and can be accessed from any device on the network via https
I have connected the modbus meter to the unit as per the instructions.
In mode I have set to AP and modbus tcp <=> modbus rtu
I have the uart setting at 9600,8,none,1 (flow control DISABLED, 485 mode ENABLED, Baudrate adaptive ??? ENABLED)
The meter needs 9600,8,1.
I have attempted to use node-red to connect to the port 8899 on the IP of the device but it cannot do it for some reason.
I'm not sure why a simple "TCP CONNECT" flow in node-red cannot make a connection to the IP and port?
630 Set up the TCP server.
Socket B is changed to OFF, please closeUSR-WIFI232-630 is an old product of our company.
We now have a new product-USR-W630.
You can browse the official website to view.
The two USR-W630s have a transmission distance of 210 meters.