Products
Product Classification
Data download
Support Center
FAQ of Industrial CAN to Ethernet Converter - No udp traffic
2020-05-14

Question:

I bought the Industrial CAN to Ethernet Converter-USR-CANET200 from amazon.de
I can config the device the webserver works, the blue led blinks - can signal is on
i set up canet200 as udp server - but there is no udp traffic - i test it with wireshark
Is there a Firmware Update available
my device has V1.0.23

 

Answer:

FW V1.0.23 is the last firmware version;

You should send data from ethernet port to serial port first, then serial port can communication with the last communicating ethernet port

see as the pic shows

how to set can to ethernet converter

Don't hesitate to contact PUSR.
Reliable products and services around you!
Subscribe Email
Ethernet Modules
WiFi Modules
4G Modules
Bluetooth Module
Contact Us
Email : inquiry@usriot.com
Tel : +86-531-88826739
Fax : +86-531-88826739-808
Address : Floor 12 and 13, CEIBS
of Maolingshan, Lixia District, Jinan,
Shandong, China
Copyright © Jinan USR IOT Technology Limited All Rights Reserved. Tags   /  Sitemap   /  Privacy Policy /  Back to previous version