Q&A
Modbus Gateway M511 Transmission Test
2020-05-09
2058

 PC----USB to RS232----Serial port----M511----Ethernet port-----PC

Default parameter:

Modbus Gateway M511 Transmission Test, default parameter

If M511 connect PC with network line directly, set the PC in the same network segment with M511,

If M511 connect PC with switchboard, set the M511 IP type: DHCP/Auto IP

Modbus Gateway M511 Transmission Test, set the M511 IP type: DHCP/Auto IP

When M511 work at MODBUS_RTU_SLAVE mode

Modbus Gateway M511 Transmission Test, When M511 work at MODBUS_RTU_SLAVE mode

Set modbus poll.exe connect IP:172.16.11.162   port: 502

Set modbus slave.exe connect serial port

Modbus Gateway M511 Transmission Test, Set modbus slave.exe connect serial port

Modbus Gateway M511 Transmission Test

And the data can transmission

Modbus Gateway M511 Transmission Test, transmit data

上一篇: USR-M511 Modbus command Store and Modbus management 下一篇: Modbus Slave Mode of Modbus Gateway USR-M511 Return
Top recommendations
热门标签