Products
IoT Gateways
Netcom Products
IoT Modules
PUSR CLoud
ODM/EMS
Pusr Cloud, a cloudplatform for the Internet of Things Zero programming comes with its own Internet of Things system.
200
+ Private Cloud project
Data localization
Business personalization
100k
+ Public Cloud registered
80% functions are free
White-labeling for VIP
LEARN MORE
KingView-A SCADA Software With 25+ Years Of Development History Nice Graphics display to monitor and Control Production flow System.
25
+ Development History
Data Collection, Analysis &
Management
100k
+ respond within 1
Perfect Alarm Monitoring &
Querying
LEARN MORE
PCB Design —— ODM/EMS We provide one-stop turnkey design service to help customers with the delivery of an out-of-the-box hardware platform that is fully tested and ready to use upon delivery.
10
+ years of experience
11 high-speed SMT
10 million pcs daily
200
+ Private Cloud project
ISO9001 cert.
Intelligent MES
LEARN MORE
Support Center
Questions about 1 port Serial to Ethernet Converter USR-N510
2020-05-12

 Question:

【What is the product model?】:1 port Serial to Ethernet Converter USR-N510 
【What's the firmware version?(You can get firmware version from AT command AT+VER or settings webpage)】:3031
【How do you connect and configure the USR device?】:ethernet to pc, rs485 to kwh meter.  configured with USR-TCP232-M4K3 Setup Software V2.3.3.97
【What's your application? What do you want to realize?】:rs485 comms

it will not communicate with the rs485 device.  We don't need any special protocol, just to ModbusTCP.  The PC will interrogate the RS485 device 
my questions are:
1. What is the "RemoteIP" field?  Does that mean the USR will communicate only with this IP and ignore queries from other hosts?  If yes, how can I disable this feature
2. What re local and remote port fields?  The master app will communicate on standard Modbus 502 port, should we put these fields to 502?
3. We don't want the USR to access any gateway, can we disable this feature?
Our setup screen attched

set up screen of 1 port Serial to Ethernet Converter USR-N510

 

Answer:

1. The local address and port are the address and port of the device itself.
2. The remote address and port are the server address and port to which the device is connected.
3.
USR-N510 set up the TCP server, only need to set the local port.
The remote client can establish a connection with the USR-N510.
4. The USR-N510 sets up the TCP client and connects to the remote server. You need to set the remote address and port number.
5. The port number is set according to your application.
If you use any port, change it to the port you need to set.

[User Manual]USR-N510-User-Manual-V1.0.8 : https://usriot.com/support/downloads/USR-N510-User-Manual-V108.html

 

Industrial loT Gateways Ranked First in China by Online Sales for Seven Consecutive Years **Data from China's Industrial IoT Gateways Market Research in 2023 by Frost & Sullivan
Subscribe
Be Honest, Do Best
Copyright © Jinan USR IOT Technology Limited All Rights Reserved. Lu ICPB No. 16015649-5/ Sitemap / Privacy Policy