Products
IoT Gateways
IoT Modules
Netcom Products
PUSR CLoud
ODM/EMS
Pusr Cloud, a cloudplatform for the Internet of Things Zero programming comes with its own Internet of Things system.
200
+ Private Cloud project
Data localization
Business personalization
100k
+ Public Cloud registered
80% functions are free
White-labeling for VIP
LEARN MORE
PCB Design —— ODM/EMS We provide one-stop turnkey design service to help customers with the delivery of an out-of-the-box hardware platform that is fully tested and ready to use upon delivery.
10
+ years of experience
11 high-speed SMT
10 million pcs daily
200
+ Private Cloud project
ISO9001 cert.
Intelligent MES
LEARN MORE
Support Center
High Performance WiFi Modules Connect to Router
2020-05-16

In this application, you can connect high performance module to your router with DHCP(get the IP address automatically) or Static IP address.
1. Close your windows firewall and disable your Ethernet network.

2. Connect the 5V adapter, antenna and the serial cable to the modules.
WiFi Modules Connect to Router

3. Connect to the module’s access point.
WiFi Modules Connect to Router

4. Open your browser, type in module’s IP address (default 10.10.100.254), username and password either is admin.
WiFi Modules Connect to Router

5. Configure module connect to router. My router is USR_CN_WM, you should connect to your router. Choose the STA mode, search and choose the AP’s SSID, choose the Security Mode and Encryption Type, type in your router’s password. Click apply and restart the module.
WiFi Modules Connect to Router

6. Connect your all modules to your router in same way, then you can connect your PC to router and use the WIFI232-SETUP software to search the module. We can get module’s information, click open to open the webpage of the module.The module get a new IP address from router. Wifi modules in DHCP mode in default setting.
WiFi Modules Connect to Router

7. The username and password either is admin. If you want to change the DHCP to static IP address. You can configure static IP address in STA Interface Setting. Please ensure there is no IP address conflict. The new IP address must in your router’s network. After you configure it, you should apply and restart the module.
WiFi Modules Connect to Router
router Figure 8

Reliable products and services around you !
Subscribe
Be Honest, Do Best
Products Serial to Ethernet/WiFi
Cellular Modems
Cellular Routers
DIN Rail Devices
IoT Gateways
LoRa Modems
Ethernet Modules
WiFi Modules
4G Modules
Bluetooth Module
Support Downloads
Technical FAQ
Technical Support
Contact Us Email : inquiry@usriot.com
Tel : +86-531-88826739
Fax : +86-531-88826739-808
Copyright © Jinan USR IOT Technology Limited All Rights Reserved. / Sitemap / Privacy Policy