Network expert of industrial IoT
sales@usriot.com
USR Cloud Official Website
USR Cloud Official Website
Leave Message

*

*

*

*

*

*

*

Support Center

USR IOT SERVICE AND SUPPORT

4G Devices
Home-FAQ-4G Devices
Home/FAQ/4G Devices

How to Set Up PPTP Client?

How to Set Up PPTP Client?

2020-05-11

2020-05-11
Share TO:

VPN connection that supports PPTP. The basic set up steps of industrial modem USR-G781  are as follows:

 

 

The basic settings of PPTP Client.jpg

The basic setting of PPTP client.jpg

 

The server address, user name, and password are basic parameters; advanced parameters such as authentication methods can be set.

Identity authentication: Only MSChapV2 means that only MPPE encryption is supported; MSChapV2 EAP PAP CHAP means support for MPPE encryption and multiple authentications; others indicate no processing, default state, by default only CHAP authentication;

VPN static IP: support static IP

LCP response interval: the heartbeat interaction interval under the link idle time, the default is 120 seconds;

LCP response failure threshold: a threshold for sending a fault reconnection for a link;

MTU: Maximum transmission unit, default 1500, can be reduced as required;

 

After the device is restarted, the PPTP-VPN virtual NIC is displayed, indicating that the PPTP-VPN has been established.

 

PPTP-VPN has been established.jpg

 

USR-G781(Industrial modem) device LAN port device can ping the PPTP server virtual address.

 

 

The G781 device LAN port device can ping the PPTP server virtual address..jpg