USR-K7: Serial to Socket A or B
I configurated Ethernet module K7 with two sockets:
A=TCP-Client, destination server address: 192.168.1.100 port 1000
B=TCP-Client, destination server address: 192.168.1.200 port 2000
When I send a packets from serial port , it is sent through both sockets (A & B) to both servers.
Is it possible to select the socket on which the packet will go? (only by socket B1 to server 192.168.0.200 for example)
You can close unused sockets
Only use sockb