Support Center
Serial Device Server-USR-TCP232-302: Unable to Use as RS232 Port
2020-05-14

This FAQ is to solve the problem of serial device server-USR-TCP232-302: Unable to Use as RS232 Port.

 

 

 

Question:

 

【What is the product model?】: serial device server USR-TCP232-302
【What's the firmware version?(You can get firmware version from AT command AT+VER or settings webpage)】:4018
【How do you connect and configure the USR device?】: Operate via LAN, TCP client
【What's your application? What do you want to realize?】: I want to connect to the module from my computer using LAN. I want the module to pass through serial commands like I was sending to an RS232 port.
I have a device which accepts commands by RS232. I want to send the commands over LAN.
It seems like the module menu and settings can be reached using the module ModuleStaticIP.
I have configured the module for our LAN and given it a static IP which I can use in a browser and see the status. The web page for the module claims no data is being sent but I am sure that it is.

Here are 3 screen shots.
1. 302 config

2. My object that is trying to connect to the module

3.shot of the module's web interface

serial device server Config

RS232_Target_Config

shot of the module\'s web interface

 

 

 

Answer:

 

Remote address needs to fill in remote address
Not 192.168.100.103

Remote address needs to fill in remote address
 

Industrial loT Gateways Ranked First in China by Online Sales for Seven Consecutive Years **Data from China's Industrial IoT Gateways Market Research in 2023 by Frost & Sullivan
Subscribe
Be Honest, Do Best
Copyright © Jinan USR IOT Technology Limited All Rights Reserved. Lu ICPB No. 16015649-5/ Sitemap / Privacy Policy