Products
IoT Gateways
Netcom Products
IoT Modules
PUSR CLoud
ODM/EMS
Pusr Cloud, a cloudplatform for the Internet of Things Zero programming comes with its own Internet of Things system.
200
+ Private Cloud project
Data localization
Business personalization
100k
+ Public Cloud registered
80% functions are free
White-labeling for VIP
LEARN MORE
KingView-A SCADA Software With 25+ Years Of Development History Nice Graphics display to monitor and Control Production flow System.
25
+ Development History
Data Collection, Analysis &
Management
100k
+ respond within 1
Perfect Alarm Monitoring &
Querying
LEARN MORE
PCB Design —— ODM/EMS We provide one-stop turnkey design service to help customers with the delivery of an out-of-the-box hardware platform that is fully tested and ready to use upon delivery.
10
+ years of experience
11 high-speed SMT
10 million pcs daily
200
+ Private Cloud project
ISO9001 cert.
Intelligent MES
LEARN MORE
Support Center
WiFi modules are two ways to build a transparent serial transmission of data
2020-05-16

two wifi modules wireless networking

This application, two wifi modules wireless networking WIFI point to point connection, as shown, so networking equipment for the user to build a transparent serial channel.
Set as follows:

(1) the left wifi module is set to AP mode, SSID and IP address of the default. Network protocol is set to TCP / Server mode, protocol port defaults to 8899.
(2) the right wifi module is set to STA mode, SSID is set to connect to the AP’s SSID. (USR-WIFI232-T), the default is DHCP, network protocol is set to TCP / Client mode

Protocol Port 8899, the target ip address as the address on the left of the module. That is 10.10.100.254.

When the right side of the module startup will find AP (SSID: USR-WIFI-T). Then the right side to the left side connection module TCP client module TCP server. All connections automatically. Then both sides of the UART can transparently transmit data.

two wireless wifi modules networking

 

This application, the two wifi modules wifi wireless router wireless network connection point, as shown, a user equipment such as networking build a transparent serial passage.
Set as follows:

This application, two wifi modules via a wireless router for wireless point to point connection, as shown below, this network is to build a two user devices transparent serial channel.
The following figure is set as follows:

(1) on the left wifi module is set to STA mode, SSID is set to connect to a wireless router. IP address to 192.168.0.10. Set and a network router fixed IP address. Network protocol is set to TCP / Server mode, protocol port defaults to 8899.
(2) the right wifi module is set to STA mode, SSID is set to connect to a wireless router SSID. Network protocol is set to TCP / Client mode, protocol port 8899, ip address to the address on the left side of the module. That is 192.168.0.10.

When the two modules will start looking for AP (wireless router) and then connected to the left side to the right TCP client module TCP server. All connections automatically. Then both sides of the UART can transparently transmit data.

Industrial loT Gateways Ranked First in China by Online Sales for Seven Consecutive Years **Data from China's Industrial IoT Gateways Market Research in 2023 by Frost & Sullivan
Subscribe
Be Honest, Do Best
Copyright © Jinan USR IOT Technology Limited All Rights Reserved. Lu ICPB No. 16015649-5/ Sitemap / Privacy Policy