Products
IoT Gateways
Netcom Products
IoT Modules
PUSR CLoud
ODM/EMS
Pusr Cloud, a cloudplatform for the Internet of Things Zero programming comes with its own Internet of Things system.
200
+ Private Cloud project
Data localization
Business personalization
100k
+ Public Cloud registered
80% functions are free
White-labeling for VIP
LEARN MORE
KingView-A SCADA Software With 25+ Years Of Development History Nice Graphics display to monitor and Control Production flow System.
25
+ Development History
Data Collection, Analysis &
Management
100k
+ respond within 1
Perfect Alarm Monitoring &
Querying
LEARN MORE
PCB Design —— ODM/EMS We provide one-stop turnkey design service to help customers with the delivery of an out-of-the-box hardware platform that is fully tested and ready to use upon delivery.
10
+ years of experience
11 high-speed SMT
10 million pcs daily
200
+ Private Cloud project
ISO9001 cert.
Intelligent MES
LEARN MORE
Support Center
USR-G781: MODBUS RTU to MODBUS TCP protocol conversion
2020-05-16

This article introduces the MODBUS RTU to MODBUS TCP protocol conversion of USR-G781.

 

USR-TCP232-Test software download address:

https://www.usriot.com/support/downloads/usr-tcp-test-testing-software.html

 

1. Insert the SIM card and connect the LAN port of G781 to the computer through a network cable. Connect the serial port of G781 to the computer by an RS232 or RS485 serial to USB cable. Then power on the device. The default LAN port IP of G781 is 192.168.1.1. Enter 192.168.1.1 in your browser, the username and password are both admins. Then we can enter the built-in web page of G781.

 enter the built-in web page of G781

 

2. If you are using an APN card, then you need to set the APN address, username and password on the built-in web page. Click Save&Apply, then restart the device.

After the device is registered to the network, the NET light and SIM light will be on.

set the APN address, username and password on the built-in web page.

 

 

3. Set the serial port parameters, these parameters should be consistent with the serial device.

Set the serial port parameters

 

 

4. Set the work mode to MODBUS, TCP Client, the remote address is the IP address of the computer. Set the port to 1200. After configuring all the parameters, power-on the modem USR-G781.

Set the work mode to MODBUS, TCP Client, the remote address is the IP address of the computer. Set the port to 1200.

Set the work mode to MODBUS, TCP Client, the remote address is the IP address of the computer. Set the port to 1200.

Set the work mode to MODBUS, TCP Client, the remote address is the IP address of the computer. Set the port to 1200.

 

 

5. In the USR-TCP232-Test software, click to open the serial port of G781. The work mode of the computer is TCP Server, the port is 1200. When I send MODBUS RTU protocol data from the serial port, I can receive MODBUS TCP protocol data from the network. Similarly, G781 can also convert MODBUS TCP protocol data on the network into MODBUS RTU protocol data on the serial port.

5.jpg

Industrial loT Gateways Ranked First in China by Online Sales for Seven Consecutive Years **Data from China's Industrial IoT Gateways Market Research in 2023 by Frost & Sullivan
Subscribe
Be Honest, Do Best
Copyright © Jinan USR IOT Technology Limited All Rights Reserved. Lu ICPB No. 16015649-5/ Sitemap / Privacy Policy