The CAN316 enables interconnection between CAN devices and serial devices, while the CAN315 connects CAN devices to network devices.


- port version & Network port version
- CANFD Protocol:Compatible with CAN2.0 A/B
- 5 Operating mode:Supports Modbus protocol
- 32 sets of filters:software configurable
- High reliable:EMC protection level 3
- Wide opertating tempterature: -40℃~+85℃
- DIN rait mounting
- >Ultra-wide baud rate:CANFD can reach up to 5Mbps
- Supports configuration via host computer and AT commands, as well as serial port firmware upgrade.
Bidirectional Data communication With this CANFD converter, users can achieve data communication and conversion between Ethernet and CANFD device.


Bidirectional Data communication With this CANFD converter, users can achieve data communication and conversion between RS485/RS232 and CANFD device.
- Scene 1:Sensors and other Modbus communication devices are connected to the CAN bus control system.


- Scene 2:CAN devices support access to Modbus master control systems.
- Extreme - speed transmission: 5Mbps, with a 400% increase in data throughput.
- High data volume: 64 bytes. The single - frame data transmission volume is increased by 8 times.
- Ultra - low latency: Microsecond level, the response time is shortened by 80%.


- Transparent Conversion : Achieve original conversion between CANFD frames and serial frames.
- Transparent Conversion with ID :Transfer the ID information in serial frames to CANFD frames.
- Standard Conversion :Conversion between 13-byte standard CAN frame format and 69-byte standard CANFD frame format.
- Modbus Protocol Conversion:
Realize Modbus data transmission over CAN bus through packet segmentation and reassembly. - Note: CAN and Modbus data must be editable.


- Custom protocol conversion: Users can customize frame headers and trailers to enable bidirectional data conversion.
- EMC protection: level 3
- Wide operating temperature: -40℃~+85℃
- Dual watchdog: hardware & software watchdog, ensure stable operating
- Wide power input: DC 9-36V, supports power input anti-reverse


- ① Support for standard frames and extended frames
- ② Support for registration packets and heartbeat packets
- ③ Network port upgrade
- ④ Support for custom baud rate
- ⑤ Configuration parameters via AT commands/upper computer


- CAN FD arbitration field baud rate : 5Kbps~1Mbps
- CAN FD data field baud rate:100Kbps~5Mbps


- 1. Automotive Electronics
- 2. Industrial Automation
- 3. Ev charging
- 4. Traffic Monitoring


- 1. Main unit *1
- 2. Network cable (Standard only for CAN315)
- 3. Certificate of compliance