Products
Product Classification
Data download
Support Center
Device get access to the Internet by WIFI modules
2020-05-16

There are two way, detail explantation as below: (Module only suitable for USR-WIFI232-A/B/C)

1. PC (Mobile) –>WIFI–>Module–>Lan cable–>Router
Module as AP mode, Ethernet port set as WAN port.

Chart as below:
Device get access to the Internet by WIFI modules

PC (Mobile) –>Lan cable–>Module–>WIFI–>Router
Module as STA mode, Ethernet port set as LAN port.

2. Through AT command set it. Detail AT command as below:

AT+FEPHY=on/off: Query/set default use Ethernet port or not (on or off)
AT+FVEW=enable/disable, enable: Ethernet port as WAN port, disable(default) Ethernet port as LAN port.

When finished, please do AT+RELD for restore setting.

Notice: AT+RELD different with power off and restore, use these two command must use AT+RELD command.
Module can through webpage to set as AP or STA mode and other setting.

Don't hesitate to contact PUSR.
Reliable products and services around you!
Subscribe Email
Ethernet Modules
WiFi Modules
4G Modules
Bluetooth Module
Contact Us
Email : inquiry@usriot.com
Tel : +86-531-88826739
Fax : +86-531-88826739-808
Address : Floor 12 and 13, CEIBS
of Maolingshan, Lixia District, Jinan,
Shandong, China
Copyright © Jinan USR IOT Technology Limited All Rights Reserved. Tags   /  Sitemap   /  Privacy Policy