IoT Gateways
IoT Modules
Netcom Products
Pusr Cloud, a cloudplatform for the Internet of Things Zero programming comes with its own Internet of Things system.
+ Private Cloud project
Data localization
Business personalization
+ Public Cloud registered
80% functions are free
White-labeling for VIP
PCB Design —— ODM/EMS We provide one-stop turnkey design service to help customers with the delivery of an out-of-the-box hardware platform that is fully tested and ready to use upon delivery.
+ years of experience
11 high-speed SMT
10 million pcs daily
+ Private Cloud project
ISO9001 cert.
Intelligent MES
Support Center
Transfer Data through High Performance WiFi Modules between two Wireless Serial Devices

In this application, you can realize two serial devices bidirectional communication. The PC/mobile which connect to the same router can configure the WIFI performance device via network.

configure the WIFI device
1.Close your windows firewall and disable your Ethernet network.

configure the WIFI deviceconfigure the WIFI device
2.Connect the 5V adapter, antenna and the serial cable to the modules.

configure WIFI converter
3.Connect to the module’s access point.

configure WIFI converter
4.Open your browser, type in modules IP address (default,username and password either is admin.

configure WIFI converter
5.Configure module connect to router.My router is USR_CN_WM, You should connect to your router. Choose the STA mode, search and choose the AP’s SSID , choose the Security Mode and Encryption Type, type in your router’s password. Click apply and restart the module.

configure WIFI converter
6.Connect your another module to your router in same way , then you can connect your PC to routerand use the WIFI232-SETUP software to search the module.We can get 2 module, 1 of them should work as server, and another one should work as client.

configure WIFI converter
7.Choose the first one(IP address , click the OPEN, open the setup webpage. The username and password either is admin. We can configure the serial parameters in Application setting after you configure, please click the Apply.

configure WIFI converter
8.We should configure this one work as TCP Server. And we can change the port. After you configure the module, Please apply and restart it.

configure WIFI converter
9.Open the client device, configure its serial parameters , when you configure the Socket A setting, It should work as TCP Client , the server Address should be the IP address of 610 which work as TCP Server. The port should be the Server Device’s port. After you configure it, please click the “Apply”, and restart the module.

configure WIFI converter
10.After the device restart, the Client device and Server device can communicate bidirectionally.

Reliable products and services around you !
Be Honest, Do Best
Products Serial to Ethernet/WiFi
Cellular Modems
Cellular Routers
DIN Rail Devices
IoT Gateways
LoRa Modems
Ethernet Modules
WiFi Modules
4G Modules
Bluetooth Module
Support Downloads
Technical FAQ
Technical Support
Contact Us Email :
Tel : +86-531-88826739
Fax : +86-531-88826739-808
Copyright © Jinan USR IOT Technology Limited All Rights Reserved. / Sitemap / Privacy Policy