Product Classification
Data download
Support Center
WiFi Device Under https Client Mode Manual



This manual introduces the https Client mode of high-performance WiFi product ( WiFi modules: A2, B2, D2 and serial to WIFI converters USR-W630, USR-W610, USR-W600, etc).


https Client mode: After enabling this function, user can send data or get data from https server. When using this function, user just needs to set related configuration by AT command or Web Server and module will package serial data into https protocol data packet then transmit them to https server.


In this manual, we take USR-WIFI232-602 V2 as example to test.


Step 1: Enter Web Server. 602 V2 is in default settings(AP mode and IP address is, so we can connect PC to 602 V2 by WiFi connection then enter Web Server through with username/password both are admin. (If user wants to configure module by AT command, user should connect PC to 602 by serial cable and refer to to enter AT command mode and send AT commands)


Step 2: Change module to STA mode and https Client mode.


By AT command: AT+WMODE=STA, AT+ TMODE=httpsdclient

Step 3: Configure STA interface setting.


By AT command: AT+WSSSID=AP’s SSID, AT+WSKEY=WPA2PSK,AES,AP’s password


Step 4: Configure https Client mode parameters. (We take our server as example)


By AT command: AT+ HTPMODE=new, AT+,80, AT+ HTPTP=GET, AT+ HTPURL=/2.php?, AT+ HTPHEAD=Content-type:text/html:charset=utf-8


Step 5: Reset the module.


By AT command: AT+Z

Don't hesitate to contact PUSR.
Reliable products and services around you!
Subscribe Email
Ethernet Modules
WiFi Modules
4G Modules
Bluetooth Module
Contact Us
Email :
Tel : +86-531-88826739
Fax : +86-531-88826739-808
Address : Floor 12 and 13, CEIBS
of Maolingshan, Lixia District, Jinan,
Shandong, China
Copyright © Jinan USR IOT Technology Limited All Rights Reserved. Tags   /  Sitemap   /  Privacy Policy