Cleaning in food and beverage facilities is not optional — it is a regulatory requirement. High-pressure water guns, hot water, and chemical detergents wash equipment every shift. Standard industrial computer typically cannot survive several cleaning cycles in this environment. When selecting hardware, three indicators must be checked one by one: ingress protection rating, cooling method, and interface sealing.
The cleaning workflow on a food and beverage production line subjects equipment to significantly more stress than a typical industrial setting. During a daily or per-shift cleaning cycle, the equipment faces three factors simultaneously:
Ordinary industrial computers are designed for dust resistance, vibration tolerance, and wide temperature ranges — not for water immersion or chemical corrosion. In a Washdown zone, common failure modes include water seeping through connectors or seams, enclosure coating peeling off, and seal degradation accelerating, ultimately leading to downtime and rising maintenance costs.
The two digits in an IP rating represent solid particle protection and liquid protection respectively. For a food plant's Washdown zone, the rating should match the actual cleaning method:
IP67 and IP69K tests assess entirely different types of stress. A device that passes an immersion test may fail under high-pressure, high-temperature spray. If the cleaning process includes pressure rinsing, IP69K is the reasonable baseline.
Industrial computers with cooling fans need to draw air through ventilation openings for heat dissipation, which means the enclosure can never be fully sealed. Fanless design dissipates heat through a solid metal chassis — heat conducts directly into the enclosure surface and radiates into the surrounding air, while eliminating the passage for outside air to enter the interior.
For Washdown environments, fanless design means:
PUSR's USR-EG series (EG228, EG528, EG628, EG828-GL, EG928A) all adopt fanless all-aluminum chassis design, operating within a temperature range of -25°C to +75°C, with hardware and software dual watchdogs ensuring long-term stable operation. The EC series (EC100, EC300, EC500) uses X86 architecture with a fully enclosed aluminum body; paired with a wide-temperature SSD, it operates in environments from -20°C to 60°C.
Enclosure material directly determines corrosion resistance. Stainless steel (SUS304 or SUS316) is the preferred material for hygienic environments — smooth surface, no coating to peel, excellent corrosion resistance. If an aluminum alloy enclosure is selected, the surface should undergo anodized treatment to enhance corrosion resistance.
Interfaces are the most vulnerable point in a Washdown environment. Even if the main unit has a high ingress protection rating, water can still seep in through unsealed connectors. When selecting hardware, pay attention to:
Different installation locations require different industrial computer form factors:
Choosing the correct product form factor based on installation position matters more than simply comparing specifications.
Product certifications reflect the factory's basic compliance requirements. PUSR models have passed multiple international certifications, including CE, ROHS, WEEE, 3C, FCC, RCM, ANATEL, ensuring electromagnetic compatibility, electrical safety, and environmental compliance. Verify test reports for specific models when selecting.
When choosing an industrial computer for a Washdown environment, confirm the following items in order:
It depends on the actual cleaning method. Low-pressure wiping or occasional rinsing can use IP65. Routine hose rinsing suggests IP66. High-pressure, high-temperature rinsing (80°C, 80–100 bar) requires IP69K rating.
IP67 tests temporary immersion (1 meter water depth for 30 minutes). IP69K tests direct injection from 80°C, 80–100 bar high-pressure water jets. The two test conditions are completely different. A device that passes an immersion test does not necessarily pass a high-pressure rinse test.
Yes. Fanless design eliminates ventilation openings, preventing water, moisture, and cleaners from entering through air channels. With no fan bearings, mechanical wear from vibration and moisture is also avoided. PUSR's USR-EG series and EC series all use fanless all-aluminum design.
Stainless steel (SUS304 or SUS316) has stronger corrosion resistance and is suitable for highly corrosive environments such as dairy and meat processing. Aluminum alloy enclosures, after anodized treatment, can meet most food and beverage scenarios at lower cost and with lighter weight.
No. Interfaces are the most vulnerable point in a Washdown environment. Even if the main enclosure reaches IP69K, water can still seep in through unsealed USB ports or Ethernet connectors. The interface sealing solution must be confirmed simultaneously when selecting.
Yes. Washdown water temperature can reach 80°C, and ambient temperature switches rapidly between room temperature and hot water. The operating temperature range must cover actual environmental conditions. PUSR's USR-EG series supports -25°C to +75°C.
Architecture choice is not directly related to Washdown protection. ARM architecture (such as EG228, EG528, EG628, EG828-GL, EG928A) has low power consumption and is suitable for data acquisition and protocol conversion. X86 architecture (such as EC100, EC300, EC500) has higher performance and is suitable for running Windows and PC software. Both have fanless designs adapted for Washdown environments.
Service life depends on ingress protection rating, material selection, and cleaning frequency. An IP65-rated standard industrial computer in a Washdown zone typically survives only a few months to one year. Equipment specifically designed for Washdown (IP69K, stainless steel enclosure, sealed interfaces) can operate stably for 5–10 years under normal conditions. Specifying for the harshest cleaning condition reduces total cost of ownership.