This article is a quick introduction of cellular router USR-G800V2 AT Commands

 

Num	Command	Function
Version
1	AT+VER	Query firmware version
2	AT+MAC	Query MAC
3	AT+ICCID	Query ICCID
4	AT+IMEI	Query IMEI
4G
5	AT+SYSINFO	Query device network information
6	AT+APN	Query/set APN
7	AT+CSQ	Query signal strength
8	AT+TRAFFIC	Query traffic information
System
9	AT+UPTIME	Query running time
10	AT+WWAN	Query IP of device
11	AT+LANN	Query/set LAN IP(effect when G800V2 work as router)
12	AT+WEBU	Query/set account and password of webpage
13	AT+PLANG	Query/set the default language of webpage
14	AT+RELD	Restore to factory setting
15	AT+Z	Reboot. Note: return +ok
16	AT+DHCPEN	Enable/disable DHCP server
Transparent
17	AT+SOCKALK	Query connect status
18	AT+SOCK	Query/set format of network protocol parameters
19	AT+UART	Query/set serial port parameters
20	AT+REGEN	Query/set transparent register package
21	AT+HTBT	Query/set transparent heartbeat package
System Shell Command
22	AT+LINUXCMP	Execute system shell command

 

For more At commands of USR-G800V2, please click https://www.usriot.com/download/M2M/USR-G800V2-AT-Commands_V1.0.1.pdf