Products
Product Classification
Data download
Support Center
How to Restore USR-TCP232-T2 to Factory Settings?
2020-08-13

A. Right click the device name, select “Reset” to restore the module to factory settings.

how to restore the module to factory settings

 

B. AT command: Connect the serial port of T2 to a computer via a serial to USB cable.

  1. Open AT Setup software, set the serial parameters of USR-TCP232-T2, then click “Open ”. Send “+++a” from the serial port, then “a+ok” will be returned. Then send “AT+RELD” to restore the device to factory settings.

AT setup software download address:

https://www.pusr.com/download/WIFI/USR-WIFI-AT%20Command%20Software.zip

Connect the serial port of T2 to a computer via a serial to USB cable

 

  1. Or we can send AT commands with other serial software: USR-TCP232-Test download address:

http://www.pusr.com/download/software/USR-TCP232-Test%20V1.4.exe

 

Open the serial port, send “+++”(Without line breaks) from the serial port, then will receive the "a" returned by the device. Reply an "a" to the device within 3S, and will receive "+ok" , which indicates that the device has entered AT command mode.

send AT commands with other serial software

send AT commands with other serial software

Send AT+RELD (with a line break) from the serial port to restore the parameter settings of USR-TCP232-T2.

 

Don't hesitate to contact PUSR.
Reliable products and services around you!
Subscribe Email
Ethernet Modules
WiFi Modules
4G Modules
Bluetooth Module
Contact Us
Email : inquiry@usriot.com
Tel : +86-531-88826739
Fax : +86-531-88826739-808
Address : Floor 12 and 13, CEIBS
of Maolingshan, Lixia District, Jinan,
Shandong, China
Copyright © Jinan USR IOT Technology Limited All Rights Reserved. Tags   /  Sitemap   /  Privacy Policy