This manual is to introduce M4 series serial-to-Ethernet products WebSocket function.
1.Introduction M4 series serial-to-Ethernet products support WebSocket function which can achieve real-time interaction between serial port and Web Server and display user data on Web Server. Application diagram as follow:
Take USR-TCP232-410s as example to enable and test the WebSocket function.
Step 1: Power the 410s, connect 410s Ethernet interface to PC directly or to same router as PC(If user connects 410s Ethernet interface to same router as PC, user needs to configure module to DHCP mode or modify static IP in same network segment as router and PC.) and connect 410s serial port to PC.
Step 2: Enter 410s Web Server by 410s IP address and login with username and password(Default settings both are admin). Step 3: Click ‘Web to Serial’ to enter WebSocket function web page and display ‘connect success!’ means enable function successfully. M4 series serial-to-Etherent products WebSocket function.
Step 3: Click ‘Web to Serial’ to enter WebSocket function web page and display ‘connect success!’ means enable function successfully.
After entering WebSocket web page, user can download and run our software USR-TCP232-Test-V1.4.exe to test data transmission.
Serial to Web:
Web to serial: