Features of Serial to Ethernet Converter USR-N510
Serial-Ethernet converter access to Network
USR-N510 is an ultimate serial converter connect to RS232/RS485/RS422 based equipment across an ethernet network
enable you to replace serial dial-up modem connection.
To realize two-way transparent transmission between COM and TCP/IP,manage COM on remote device over network.
To communicate to multiple serial devices at the same time across a LAN or WAN network.
RS232&RS485&RS422 to Ethernet
1.Modbus Gateway function,support modbus TCP to Modbus RTU in bi-direction, work as master/slave
2.Virtual COM ports connect PC/servers to remote serial devices over Ethernet
3.Up to 8 simultaneous clients when act as TCP Server
4.Support network printing via IP address
5.httpsD Client and Websocket function available
6.Two serial port,each port can be work as RS232/RS485/RS422 and can be used individually.
7.Unique global MAC address,defined MAC address is available
8.Support DNS & DHCP, automatically access IP
9.One port corresponsiding to two socket
10.Support Modbus Polling
11.Reload button, a key restore default Settings
12.Wide voltage input 5-36V
13.Support Modbus TCP to Modbus ASCII