A common router uses a frequency range of 2.4hz, while 5G router uses a frequency range of 5HZ, which is commonly a gigabit wireless router. In contrast, frequency band of 5G has advantages such as stronger anti-jamming, more stable signals, wider coverage and higher data transmission bottlenecks. This article reveals the powerful features of 5G industrial routers
Features of 5G routers
1.Good anti-interference performance
The 5G frequency band has a high signal, which has a great impact on the penetration of walls, resulting in a small interference between routers. Moreover the signal is very stable.
2. Fast transmission speed
If you uses 100MB broadband, the router is under 5G, the measured network speed of 5G industrial router can reach 10MB per second, while the download speed of 2.4G industrial router was 4 to 6 trillion per second. Of course, it depends the broadband of your place.
3.Requirements for receiving and transmitting equipment
For example, some old mobile phones and laptop do not support 5G, so even if the router is under 5G, you will not be able to find its signal, so you need to buy a special wireless network card.
Choose 2.4G industrial router or 5G industrial router for industrial use?
2.4g and 5G respectively refer to the emission frequency of wireless routers. Among them, 2.4GHz frequency is the most widely used, which is supported by almost all computer and smartphone devices.
However, because 2.4G is commonly used, the problem is that severe interference will slow down the data transmission rate.
5G is designed to avoid interference problems because 5G is currently used less by fewer people. Like a new highway, for example, with fewer cars on the road, another 2.4g "old road" is already congested.