4G LTE router and 5g lte router are two kinds of wireless communication technologies which are widely used in industrial automation, Internet of things and other fields.Although they all have similar functions and application scenarios,However, their performance, usage and application scenarios are very different.This article will elaborate on the advantages and disadvantages of 4G LTE router and 5g lte router from the following aspects.
The biggest feature of 5g lte router is that its transmission speed is very fast, much faster than 4G LTE router.The 5g lte router has a theoretical speed of 10Gbps, while the 4G LTE router has a speed of only a few hundred Mbps.In large-scale Internet of Things applications, high-speed transmission is very critical, which is a huge advantage of 5g lte router.In the fields of high-definition video surveillance, telemedicine and intelligent manufacturing,The 5g lte router can provide more stable and high-speed data transmission.
However, the 4G LTE router also has very important applications in some scenarios.For example, in the fields of electric power and water conservancy, because of the small amount of data transmission, the transmission speed is not the most critical factor.So the 4G LTE router is sufficient. In addition, 4G LTE router also has certain advantages in terms of coverage and signal stability.
The communication latency of 5g lte router is smaller than that of 4G LTE router, which can reach millisecond latency.This is very important for remote control, intelligent manufacturing and other fields.In these scenarios, immediacy is critical and requires rapid response and execution, so 5G has obvious advantages in this respect.
However, for some application scenarios such as sensor data monitoring and acquisition, communication delay is not a very important factor.So the 4G LTE router is not inferior to the 5g lte router in this respect.At the same time, as the 5G network is still being upgraded and optimized, the current 5G communication delay can not fully meet all application scenarios.
Because the performance requirements of 5g lte router, such as transmission speed and communication delay, are very high,Therefore, the 5g lte router consumes more energy than the 4G LTE router.This is undoubtedly a great challenge for battery-powered terminal devices such as mobile devices.The relatively low power consumption of 4G LTE router makes it more suitable for the acquisition and transmission of field devices.
In addition, the signal coverage of 5g lte router is smaller than that of 4G LTE router.Because of the propagation characteristics and frequency band of 5G signal, its signal coverage is relatively small.This means that 5g lte router needs more base station construction to achieve full coverage.The 4G LTE router has a wider coverage because it uses a lower frequency band and has a stronger signal transmission capability.It is suitable for a wider range of application scenarios.
Due to the relatively high cost of 5g lte routers, especially for some industrial applications that require the use of large-scale equipment,Cost is an even more important consideration. For these application scenarios, 4G LTE router has more advantages.In many industrial automation, intelligent manufacturing and other fields, a large number of sensors and equipment need to be deployed.Therefore, cost control is very important.
In addition, due to the continuous development and improvement of 5G technology, there are uncertainties in its coverage and signal stability.The 4G industrial wireless router has been very mature, and its stability and reliability have been widely recognized.The 4G LTE router is more reliable in application scenarios that require long-term stable operation.
There are significant differences between 4G LTE router and 5G in terms of transmission speed, communication delay, energy consumption and coverage.The transmission speed and communication delay of 5G are faster, but the cost is higher, the signal coverage is smaller, and the energy consumption is higher.The 4G LTE router, on the other hand, is mature and stable, with lower cost, wider signal coverage and lower energy consumption.In different application scenarios, choosing the right technology can better meet the needs.
Taking industrial automation as an example, 4G LTE router is suitable for many scenarios requiring large-scale sensor deployment and remote monitoring.For example, in food processing, chemical industry and other industries, a large number of sensors need to be deployed to collect production data.The number of these sensors is usually very large. At this point, cost control is very important, so 4G LTE router becomes the first choice.In scenarios such as intelligent manufacturing that require high-speed transmission and low latency, 5G technology is needed.To provide faster and real-time data transmission.
In practical applications, we need to choose the appropriate technology according to the needs of different scenarios.For some application scenarios that require high data transmission speed and instantaneity, such as high-definition video surveillance, telemedicine and other fields.The advantages of 5G technology are more obvious. For some scenarios requiring large-scale deployment of sensors and equipment, cost control is more critical.The 4G LTE router is more suitable.
In addition, the continuous development and popularization of 5G technology will gradually change this situation.With the gradual improvement of 5G network and the continuous decline of cost,5g lte router has been widely used in more and more application scenarios.It is believed that in the future development, 5G technology will gradually become one of the mainstream technologies in the fields of industrial automation and Internet of Things.
